Switching Devices

PSR-MC30-2NO-1DO-24DC-SP; Relay; Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1- or 2-channel operation, automatic or manual, monitored start, cross-circuit detection, 2 enabling current paths, U_S = 24 V DC, plug-in Push-in terminal block; packing unit: 1

REL-MR- 24DC/21; Relay; Plug-in miniature power relay, with power contact, 1 changeover contact, input voltage 24 V DC; Packing unit (PU): 10

PTCB E1 24DC/3A NO; Circuit Breaker; 1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.; Packing unit (PU): 1

OPT-24DC/ 24DC/ 2; Relay; Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 ... 33 V DC/3 A; packing unit: 10

ELR 1-SC-24DC/600AC-20; Relay; Single-phase solid-state contactor, input voltage: 24 V DC, output current: 20 A, zero voltage switch; Packing unit (PU): 1

CBMC E4 24DC/1-10A S-R; Circuit Breaker; Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.; Packing unit (PU): 1

AXL E PN IOL8 DI4 M12 6M; Automatation Systems; Axioline E PROFINET device in a metal housing with 8 IO-Link ports and 4 digital inputs, 24 V DC, M12 fast connection technology; packing unit: 1

PSR-SPP- 24UC/ESM4/3X1/1X2/B; Relay; Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, pluggable Push-in terminal block; packing unit: 1

PSR-SPP- 24DC/URD3/4X1/2X2/3; Relay; 1-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, the contacts have an off-delay (0.3 ... 3 s), Cat. 3, PL e in accordance with EN ISO 13849, width: 22.5 mm, pluggable Push-in terminal block; Packing unit (PU): 1

ELR 1-SC-24DC/600AC-30; Relay; Single-phase solid-state contactor, input voltage: 24 V DC, output current: 30 A, zero voltage switch; packing unit: 1

AXL SE PSDO4/2 2A; Automatation Systems; Axioline Smart Elements, Digital output module, Functional safety, PROFIsafe, Safe digital outputs: 4 (1-channel assignment), 2 (2-channel assignment), 24 V DC, 2 A, connection technology: 2-conductor, degree of protection: IP20; Packing unit (PU): 1

AXL E EIP IOL8 DI4 M12 6P; Automatation Systems; Axioline E, EtherNet/IP™, M12 fast connection technology, IO-Link ports Class A: 4, connection method: M12 fast connection technology, connection technology: 3-conductor, IO-Link ports Class B: 4, connection method: M12 fast connection technology, connection technology: 3-conductor, Digital inputs at pin 2 for class A ports: 4, 24 V DC, connection technology: 3-conductor, Plastic housing, degree of protection: IP65/IP67; Packing unit (PU): 1

IL ETH BK DI8 DO4 2TX-PAC; Automatation Systems; Inline, Bus coupler, Modbus/TCP(UDP), RJ45 jack, Digital inputs: 8, 24 V DC, connection technology: 3-conductor, Digital outputs: 4, 24 V DC, connection technology: 3-conductor, transmission speed in the local bus: 500 kbps / 2 Mbps, degree of protection: IP20, including Inline connectors and marking fields; packing unit: 1

IB IL 24 DI 32/HD-PAC; Automatation Systems; Inline, Digital input terminal, Digital inputs: 32, 24 V DC, connection technology: 1-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields; Packing unit (PU): 1

RIF-2-RSC-LDP-125DC/2X21; Relay; Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 125 V DC; packing unit: 10

REL-SR- 24DC/2X21/FG; Relay; Safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact type: 2 changeover contacts. The requirements for type A in accordance with DIN EN 61810-3 are satisfied if the circuit is designed as 1 N/O contact / 1 N/C contact.; Packing unit (PU): 20

PLC-OSC- 24DC/ 24DC/ 10/R; Relay; PLC-INTERFACE with checkback contact, consisting of basic terminal block with screw connection and integrated miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 ... 33 V DC/10 A; packing unit: 10

SACC-M12MSX-8QO SH PN; Sensor-Acuator Cable; Data connector, PROFINET CAT6_A (10 Gbps), 8-position, halogen-free, shielded, Plug straight M12 SPEEDCON, X-coded, Insulation displacement connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 5 mm ... 9.7 mm; Packing unit (PU): 1

CB E1 24DC/2A NO P; Circuit Breaker; Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.; packing unit: 1

CB E1 24DC/3A NO P; Circuit Breaker; Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.; packing unit: 1