Communication Modules

POWERFLEX 70/700 CONTROLNET TO DPI COMMUNICATION

POWERFLEX EtherNet/IP Communication Adaptor - Dual Port

POWERFLEX 40 Component Class DEVICENET TO DSI COMMUNICATION ADAPTER

PowerFlex Architecture Class EtherNet/IP to DPI Communication Adapter

PowerFlex Architecture Class DeviceNet Communication Adapter, intended for installation into a PowerFlex 70 Drives and is used for network communication

PowerFlex Component Class PROFIBUS Communication Adapter

DeviceNet Communication Module for Bulletin 160 Smart Speed Controllers

DeviceNet to SCANport Communication Adapter, 1 x 5-Pin DeviceNet Port, 1 x SCANport, 1 x RS-232 Serial Port, Enhanced, 24VDC Powered, DIN Rail Mounted, Series A

PowerFlex Component Class ControlNet Communication Adapter

POWERFLEX COMPONENT CLASS, ETHERNET/IP COMMUNICATION ADAPTER

PowerFlex Architecture Class Remote I/O Communication Adapter

SCANPORT/DPI CABLE 3 METER 9.8 FT, PORT 2, MALE TO MALE CONNECTORS

Opt Cable Kit - Connects to H.I.M. Cradle Port - Length 3m

COMMUNICATION OPTION KIT, SINGLE POINT REMOTE I/O, DIN RAIL MOUNT, REQUIRES 115V AC POWER, REQUIRES A COMMUNICATION OPTION CABLE 1202-C03, - C10, -C30, -C90 TO BE FUNCTIONAL

SERIAL RS232/RS422/DF1/DH485 TO SCANPORT COMMUNICATION MODULE, PANEL MOUNT, REQUIRES EXTERNAL AC POWER, REQUIRES A COMMUNICATION OPTION CABLE 1202-C03, - C10, -C30, -C90 TO BE FUNCTIONAL.

COMMUNICATION OPTION KIT, DEVICENET COMMUNICATIONS, REQUIRES 24V DC, REQUIRES A COMMUNICATION OPTION CABLE 1202-C03, - C10, -C30, -C90 TO BE FUNCTIONAL.

SLC to SCANport 3-Channel Communication Module, provides an Interface between any SLC Processor or other product that can control modules within a SLC rack and up to three SCANport Devices

Anacanda-RS232 Smart Serial to SCANport Self-Powered Adapter/Converter with 1203-SFC and 1202-C10 cables. RS-232 to SCANport/DPI connections for DriveExplorer and DriveTools32 software packages; Operating power derived from the SCANport/DPI host product, no separate power supply needed; Optimized for software configuration, no DIP switches; LEDs for transmit, receive, and converter status; Connect to Handheld PCs via a 1203-SNM null modem adapter (supplied separately). Three status indicators (LEDs) report the operating status of the module; Serial baud rates of 9600 bps, 19.2Kbps, and 38.4Kbps are supported. 9600 bps is the factory default; The serial converter can connect to products implementing SCANport such as 1336 PLUS II drives, or products implementing DPI such as PowerFlex drives.

SCANport/DPI/DSI USB Converter/Adapter, provides a communications interface between a computer and any Allen-Bradley product implementing DPI (PowerFlex 7-Class drives), DSI (PowerFlex 4-Class drives), or SCANport (1305 drives, 1336 drives, etc.), uses the full-duplex RS-232 DF1 protocol

PowerFlex Architecture Class RS-485 HVAC to DPI Communication Adapter