IFM
IGS204
IFM IGS204
inductive sensor
Factory sealed
New in original manufacturer’s packaging with intact/unbroken factory seal. The item usually has a current series/version and manufacture date.
Factory Sealed (from surplus)
New in original manufacturer’s packaging with intact/unbroken factory seal.
New in open original or neutral packaging
New in open original packaging or securely packed in neutral packaging.
Used
Used, cleaned and inspected. The item is in very good condition and securely packed in neutral packaging.
Refurbished
Used and refurbished. The item is in very good condition and securely packed in neutral packaging.
Inductive sensors, Inductive sensor, M18 x 1, Metal thread, Sensing range: 8 mm, flush mountable, 3-wire, DC PNP, Operating voltage: 10...30 V DC, Current consumption: 10 mA, normally open, Connector, M12 connector, Increased sensing range , Gold-plated contacts, Housing material: Brass white bronze coated active face: PBT (Pocan) PEI
Product Specifications*
*Information provided without warranty of any kind
Similar products
-
IFM
IGC209
IFM IGC209IFM Efector 100 IGB3008BAPKG/M/US-104-DPO Inductive sensor, Metal thread, M18 x 1, DC PNP, Increased sensing range, Gold-plated contacts, Connector, Sensing range 8 mm
-
IFM
IGC213
IFM IGC213Inductive sensor; M18 x 1 / L = 70 mm; Sensing range 12 mm non-flush mountable; normally open; DC PNP/NPN; M12 Connector; IP 68; ('Coolant'); 2-wire,3-wire; Ambient temperature -25...70 °C; Switching frequency 300 Hz IGKC012-ASKG/M/US-104-DRS/2LED
-
IFM
IGC233
IFM IGC233efector 100 IGK3012-BPKG/M/K1/US-104-DPS Inductive sensor, Metal thread, M18 x 1, DC PNP, Gold-plated contacts, Correction factor = 1, Connector, Gold-plated contacts, Sensing range 12 mm [nf]
-
IFM
IGS212
IFM IGS212Inductive sensor, M18 x 1 / L = 70 mm, Sensing range 8 mm flush mountable, normally open, DC PNP, M12 Connector, IP 67, 3-wire, Ambient temperature -25...70 °C, Switching frequency 400 Hz
-
IFM
IGS213
IFM IGS213Inductive sensor; M18 x 1 / L = 70 mm; Sensing range 12 mm non-flush mountable; normally open; DC PNP; M12 Connector; IP 67; 3-wire; Ambient temperature -25...70 °C; Switching frequency 300 Hz
-
IFM
IGT200
IFM IGT200Inductive sensors, Inductive sensor, M18 x 1, Metal thread, Sensing range: 12 mm, non-flush mountable, 3-wire, DC PNP, Operating voltage: 10...36 V DC, Current consumption: 10 mA, normally open, Connector, M12 connector, Increased sensing range , Gold-plated contacts, Housing material: threaded sleeve: stainless steel (316L) active face: PEEK (polyether ether ketone)